According to the survey, 90% of the rot disease of the fruit trees is not dyed by cutting the kerfs. Therefore, closing the cut kerfs is an important means to prevent fruit rot. The following points should be made in order to seal the sawing port:

Both the top and the bottom seals are not only the top seals, but also the edges and surrounding parts. The thicker the diameter, the longer the seal must be extended.

Three days after the non-healing continuous sealing agent is applied, the scissors should be checked again. Once it is found, it must be resealed. After 30 days, it was found that cracks in large kerfs had to be sealed. If you find that the saw kerf does not heal, it must be sealed. Until it was discovered that new skin was grown.

The use of paper and mud to sew the cut kerfs. A lot of fruit and vegetable plastics are used to wrap the cutting kerfs. The plastic wrap can prevent cracks, but it is easy to cause mildew rot without ventilation. The correct course of action is to cut the mouth and seal it with a chemical. After the slicing is too large, the drug is dried and the wet mud (cannot be drooled) is used to paste the paper. In this way, the slash of fruit trees will heal quickly and should not be rot.

When choosing the right pharmaceutical agent in the treatment of cutting saw rot, it is recommended to use bactericidal, oily, and highly viscous ointment. It is not possible to simply apply agents that specialize in the treatment of rot to smear the excision saws, because the simple treatment of rot causes some wounds to cause injury to fruit trees.

Disposable Nitrile Gloves

ZHANGJIAGANG DINSHENGLIN TRADING CO.,LTD , https://www.dslhouse.com