When using the beverage mixer, it should be properly used for maintenance. In addition to the general beverage mixer maintenance rules, the following items should be noted:

1. After the first operation of the beverage mixer for 10 hours, it should be fully inspected. If necessary, the joints must be tightened once.

2. After the beverage mixer has been running for 10 hours for the first time, check the tension of the V-belt. When tightening the V-belt evenly after tightening the screw, tighten the locking bolts of the motor seat plate to prevent loosening.

3. All parts of the beverage mixer should be kept clean, especially the inner wall of the mixing container and the refueling hole in the discharge hole should be cleaned. The beverage mixer should not be used to apply the anti-rust grease to the inner wall and the discharge part for a long time.

4. The beverage mixer should be inspected frequently, and it should be repaired and replaced in time when the damaged parts are damaged.

5. The electrical and beverage mixer should be inspected regularly, especially the heater, and the damage should be replaced in time.

6. The electrical control box should be cleaned regularly. It is necessary to clean the dust on the electrical components in time to prevent damage to the contactor contacts.

7, the motor should be stable when running, no abnormal sound, often check whether the temperature rise is normal
8. Whether the rotating parts such as spindle bearings and V-belt pulleys are running normally. If there is abnormal noise or vibration, stop immediately and check. If there are damaged parts, they should be replaced and repaired immediately.

9. When changing the color of the material machine, the mixing container and the discharge area must be cleaned.

10. The beverage mixer should not exceed the maximum loading factor. When the beverage mixer is running, if adding plasticizer should be added slowly, the plasticizer should not be suddenly poured into the body, causing local material to agglomerate, resulting in a sudden increase in load and damage to the beverage mixer.