During the operation of peanut machinery, it is strictly forbidden to reach into the feeding port, the fan mouth, and the discharge port; the operator should tie the cuffs when working, and the lesbians should bring a work cap; if they hear abnormal sounds or find faults during operation, they must Stop the inspection, promptly eliminate the fault, and strictly prohibit the operation of the machine; it is strictly forbidden to work with the fruit picker; after the end of the work, there must be professionals to check, adjust and maintain.

Five major considerations for using peanut machinery:

1. First check whether the fasteners are tightened, whether the rotating part is flexible, whether there is grease in each bearing, and whether the shelling machine is placed on a stable ground. To check the supply voltage, the switch must be in the off position
2. After the motor is started, the steering of the rotor should be consistent with the direction indicated on the machine. First idle for a few minutes, observe whether there is abnormal noise, and confirm that the operation is normal.

3. When operating, people should not stand on the side of the transmission belt to avoid injury.

4 When you are ready to store the machine, you should eliminate dirt and dirt on the surface and residual kernels. The machine should be covered well and placed in a dry warehouse to avoid the sun and rain and remove the drive belt for additional storage.

5. Clean the bearings with diesel oil, dry and apply grease. Adequate grease in the drive and bearing chambers should be maintained and cleaned and replaced regularly.