One-stop solution, one machine multi-test
High sensitivity and specificity.
Maintenance-free.
Dna acquisition test swab kit,It is used by veterinarians to quickly diagnose diseases in dogs and cats,High-precision pet colloidal gold detection kit Jiangsu iiLO Biotechnology Co., Ltd. , https://www.iilogene.com
1. Electric blast drying oven is divided into two types: desktop structure and vertical structure. The desktop structure (desktop electric blast drying oven) means that the box body and the sub-tank (control panel) are distributed to the left and right, the air duct is arranged on the rear side, and the wind forms horizontal convection in the working chamber, and the working volume of the studio is from 15L to 214L. The vertical structure (vertical blast drying oven) has a box body and a sub-tank distributed up and down, and the wind forms vertical convection in the working chamber. The vertical structure working chamber volume ranges from 15L to 920L or more.
2, the selection of the size of the electric blast drying oven: the size of the studio can be determined according to the size and number of the test items. During the drying process, the number and placement of the test items in the studio affect the uniformity of the temperature in the working chamber. When the temperature uniformity requirement is relatively high, it is recommended to reduce the number of samples or select a large drying oven to ensure hot air convection in the working chamber. The sample of the article is kept at a distance of 2~3cm or more from the inner wall or the inlet and outlet, which is favorable for hot air convection inside the studio.
3, the choice of temperature range and the use of temperature: our company blast drying oven temperature range has three: RT + 10 ~ 250 ° C, RT + 10 ~ 300 ° C, 100 ~ 400 ° C (high temperature blast drying oven). When the temperature is below 150 °C, the drying oven with RT+10~250°C temperature range can be selected; when the temperature is between 150°C and 290°C, it is recommended to select the drying oven with RT+10~300°C temperature range; often When the operating temperature is between 260 °C and 290 °C, it is recommended to equip the motor with overheat protection device and motor geothermal protection. When the temperature is above 300 °C, please use a high temperature electric blast drying oven with a temperature range of 100~400 °C.
4. If you need to carry out multi-stage heating, heat preservation control or control of heating rate, you need to choose programmable temperature controller (both domestic and imported).
5. The normal heating rate of the electric blast drying oven is generally 3~5°C/min. The temperature rises rapidly at low temperature, the temperature rises slowly at high temperature, the temperature rises quickly in summer, and the temperature rises slowly in winter. The heating rate can be increased to increase the heating rate. However, the heating power of the drying box increases, and the temperature overshoot at the constant temperature also increases.
6. If the dry sample is damp and needs to be dried quickly, please explain with our company, we will customize the quick drying box for you.
7. The electric blast drying oven can be equipped with lead holes (for sample energization or lead wire), and the diameter of the lead holes is optional from 25, 50, 80 to 100 mm.
The test time is 3 to 15 minutes, and the results are quickly released
Easy-to-use touch screen platform, multilingual operating system
Reagents are stored at room temperature for 24 months without cold chain transportation.
Electric blast drying oven purchase guide
Electric blast drying oven selection guide When selecting the electric blast drying oven, you need to pay attention to the following points: