Ultrasonic vibrating screen is a kind of precision screening equipment, which is mainly used for fine screening of materials. Compared with ordinary circular vibrating screen, the screening precision is higher. However, if you do not pay attention during transportation or use, it is easy to cause damage to the screen machine. In particular, the ultrasonic system is more important for electrical components. Therefore, how to extend the service life of the equipment is a problem that users should pay attention to during use.

The common vibrating screen basically needs to pay attention to vibration motor, screen, screen frame, rubber strip and other components to prevent the wear of these parts. The leakage of the material can maintain the normal operation of the equipment, but the ultrasonic vibrating screen is different. An ultrasonic system is installed on the basis of the vibrating screen, so it is necessary to pay more attention to the operation and maintenance than the ordinary screening equipment.

1. Transportation process: The ultrasonic system is a set of precise electrical components. The requirements for environment, temperature, dust, humidity, etc. are relatively strict. In the transportation process from the factory, it is necessary to pay attention to moisture, water and high temperature exposure. . If you do not pay attention during transportation, it is easy to damage or crush the components inside the equipment. At the same time, you need to pay attention to the waterproof and moisture-proof aspects during transportation. We have already talked about the debugging of ultrasonic vibrating screens, and we will not explain them here.

2. In the process of use: In the course of use, the user needs to pay attention to the dustproof and shockproof protection of the ultrasonic system. Ultrasonic system is a precise electrical system, so when placing equipment, it is best to install a dust cover on the ultrasonic system to prevent excessive dust from entering the inside of the machine and affecting the operation of the ultrasonic vibrating screen. In addition, it is necessary to provide vibration isolation protection for the ultrasonic system to prevent the internal components of the system from being damaged. Finally, pay attention to ventilation. The electrical components will have a fever during the working process. This is a normal phenomenon, but the user needs to pay attention to the ventilation and heat dissipation of the system to keep the temperature of the components not too high.

3. Maintenance process. During the shutdown, the ultrasonic vibrating screen needs to be systematically checked to prevent dust from entering the ultrasonic probe portion, causing the ultrasonic transducer to malfunction. The transducer of the ultrasonic system converts electrical energy into wave energy and transmits it on the screen surface. If the dust enters the transducer, the screen surface of the ultrasonic vibrating screen will not vibrate, and the sieving motion of the material on the screen surface is abnormal.

4. Adjustment of the ultrasound system. The ultrasonic vibrating screen needs to be adjusted when it is used for the first time. The digital display on the liquid crystal control panel shows the vibration frequency and other data. It is adjusted according to the above data and the movement of the screen material and the material screening condition to avoid the frequency. The adjustment is too high, causing the system and the vibrating screen to operate at full load. Long-term operation easily causes the components to heat up and shorten the service life of the equipment.

In the maintenance process, it is necessary to pay attention to the above contents to protect the components of the ultrasonic vibrating screen and prolong the service life of the components.