How to maintain the compressor in the constant temperature and humidity chamber 1. Carefully check the operation sounds of cylinders and moving parts at all levels. According to “listeningâ€, it is normal to check whether its working condition is normal. If abnormal sound is found, stop it immediately; 2. Pay attention to the pressure gauges at all levels, whether the pressure gauges on the gas storage tank and the cooler and the indication value of the lubricant pressure gauge are within the specified range; 3. Check if the cooling water temperature and flow rate are normal; 4. Check the supply of lubricating oil and the lubrication system of the lubrication system of the moving mechanism (some compressors are equipped with plexiglass baffle on the side of the crosshead rail of the fuselage, which can directly see the movement of the crosshead and the supply of lubricating oil); The filler can be unidirectionally used for oil discharge inspection, and the oil injector can be inspected for oil injection into the cylinder; 5. Observe whether the oil level in the oil pool of the fuselage and the lubricating oil in the oiler are lower than the scale line. If it is low, it should be added in time (check with the oil dipstick to stop); 6. Check the temperature of the suction and exhaust cover at the cross rail of the crankcase of the fuselage by hand. 7. Pay attention to the temperature rise of the motor, the bearing temperature and voltmeter, and the current meter indicating whether the condition is normal. The current should not exceed the rated current of the motor. If it exceeds, find the cause or stop the inspection; 8. Always check whether there are any foreign objects or even conductive objects in the motor, whether the coil is damaged, whether the stator or the rotor is rubbed, otherwise the motor will burn out after the motor starts; 9. If the water-cooled compressor can not immediately pass water after water is cut, avoid cylinder cracks due to uneven heat and cold. After parking in winter, drain the cooling water to avoid freezing and cracking of the cylinder; 10. Check whether the compressor is vibrating, whether the anchor screws are loose or falling off; 11. Check the pressure regulator or load regulator, whether the safety cutting is sensitive; 12. Pay attention to the hygiene of the compressor and its equipment and environment; 13. Gas storage tanks, coolers, and oil-water separators must always release oil and water; 14. The lubricating machine used should be precipitating and filtering. Winter and summer compressor oils should be used differently. We are a professional Chinese supplier of Stomach Care Material; we supply various products of Improve Digestion Material and Stomach Portect Material ; and we can providing product images and basic parameters with each Invigorating Stomach Material, like Pinocembrin 98%, Cimetidine Powder, Astilbe Chinensis Extract, Stomach Care Material, Proglumide Powder. Look forward to your cooperation! Pinocembrin 98% ,Cimetidine Powder,Astilbe Chinensis Extract,Stomach Care Material,Proglumide Powder Xi'an Quanao Biotech Co., Ltd. , https://www.quanaobio.com
How to maintain the compressor in the constant temperature and humidity chamber