Whether the hot melt hose can be repaired, we usually determine it through a series of tests. In short, it is the exclusion method. Below, we will talk about several situations. 1. The actual temperature of the hot melt hose is not detected. This may be a fault in the sensor. It is necessary to return to the factory to replace the sensor. 2. The hot melt glue machine tube is not heated, it may be a problem with the wire or the heating wire. This can be repaired, but it needs to be returned to the factory, and the maintenance cost is relatively high. It is recommended to buy it again. 4. If the joint between the hot melt hose and the main machine or the glue gun is leaking, it is not fully tightened and needs to be tightened with a wrench. Nuosheng hot melt glue machine manufacturers recommend that you pay attention to the protection of the hose when using and not using the hot melt hose. Do not soak the water, do not step on it, do not bend it, etc., pay attention to the aging degree of the joint. Any product will last longer under your care. Wifi Wireless Baby Monitor,Radio Baby Monitor,Wireless Baby Monitors,Wireless Camera Baby Monitor Shenzhen Zuomi Technology Co., Ltd. , https://www.zuomicamera.com
3. If the middle part of the hose leaks heavily, it is a burst. This situation is not repairable and only new ones can be purchased.
How to judge whether the hot melt hose can be repaired