Bone screws, also known as fracture fixation screws, are commonly used in clinical practice to fix orthopedic implants.
Bone screws are usually used to fix internal fractures or dislocations by directly screing into two different bone blocks or fixing an internal implant such as a bone plate to achieve fracture fixation, position the bone and promote its healing. Bone screws are used in a wide range of areas, including the shoulder, elbow, hip, knee, spine, etc. For example, pedicle screw systems are used for spinal fusion, and compression bone screws are commonly used for foot and ankle surgery or fixation of other fractures under pressure. Similar to traditional mechanical screws, the main structures of bone screws also include nail cap, nail body, and nail tip. Screws can be used to fix bone plates or bone fragments. When used for the former, they are called plate screws, and when used for the latter (to prevent the collapse of bone fragments), they are called positional screws. The latter can be inserted into the plate holes, and can be placed on the bone alone (also known as compression screws). Compression screws can be used to increase interfragment pressure.
(1) The screw cap
The screw cap has three main functions: the first is to optimize the force. The protruding cap makes the contact area between the screw and bone larger, increases the load area, optimizes the local force at the screw insertion site, and reduces the risk of bone rupture caused by excessive stress. The second is the positioning effect. The prominent cap makes the bone nail can only be screwed into a certain depth to prevent the whole bone nail from being screwed into the bone completely. The third function is to provide the position of force application by rotating the force groove at the cap to move the bone nail forward and drive it into the bone. Now, the force groove is mostly inner hexagonal, which does not require axial force to maintain the actuator in the center position and is suitable for a wider range of fractures.
(2) Screw the body
The size of the nail body determines the strength and fatigue resistance of the bone nail. The larger the diameter of the nail body, the stronger the strength will be, and the corresponding fatigue resistance will be better. In addition to the diameter of the nail body, the pitch and tooth depth of the screw body thread are also the key parameters of the nail body design. Different thread design has an important effect on the pressure and occlusal performance of the screw.
(3) Screw tip
Tapping is the process of phalangeal nail cutting thread in the bone. According to the shape of the nail tip, the bone nail can be divided into self-tapping nail and non-self-tapping nail. The nail tip of the self-tapping nail is sharper and can be directly screwed into the bone without pre-drilling. Usually, self-tapping screws are used for Cancellous bone, and the bone is compressed when the screw is inserted, so as to increase the bone density of the occlusal part locally and enhance the occlusal effect. However, when inserting screws in Cortical bone, the screw channel is generally pre-punched, and then the bone screw is screwed. Usually, the self-tapping screw is not directly used to prevent the bone screw from being stuck or damaged because the cortical bone is too hard.
Bone Screw,Cancellous Screw,screws in bone,Cortical Screw Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.medthofixation.com
How to apply for transfer of agricultural machinery
Any agricultural machinery that implements licensing and certification management is transferred or sold by other provinces to other provinces or transferred from the province's jurisdiction to other jurisdictions. membership. For the transfer of agricultural machinery, the number plates and driving licenses must be replaced, and the agricultural machinery supervision authority that originally issued the cards or certificates should handle the transfer. The specific procedures are as follows: (1) Transfer procedures (1) The owner of the agricultural locomotive implementing the license and license management shall fill out the motor vehicle transfer approval application form and handle the transfer formalities with the introduction letter and other relevant certificates and transaction invoices. (2) After passing the safety inspection, the agricultural machinery supervision authority shall collect its number plate and driving permit, and record the “turn to the ground†in the relevant column of the driving permit and locomotive registration application form, and stamp the seal of the agricultural machinery supervision authority. Date, load the file. (3) Fill out the motor vehicle transfer notice, seal it together with the locomotive file, and give it to the owner of the locomotive so that the agricultural machinery supervision agency of the new nationality can apply for the settlement. (4) Log off the original registration form of the locomotive from the ledger and the computer, and issue a new temporary number plate to drive to the new owner's address. (2) Transference procedures (1) After the agricultural locomotive arrives at the destination, the locomotive shall, with the unit certificate and the sealed locomotive file, fill in the locomotive application registration form with the agricultural machinery supervision agency of the new nationality, and apply for transferring into the formalities. (2) The Agricultural Machinery Supervision Authority opened the locomotive files, confiscated the temporary number plate, and carried out the identification inspection of the locomotives. After verification, a new number plate and driving permit will be issued. (3) Farm machinery with the following conditions is not allowed to transfer the agricultural machinery subject to license management. When the annual or previous year fails to pass the inspection or fails to carry out the annual inspection, the motor vehicles that have reached the scrapping standard or are about to be scrapped will not be allowed to transfer. Membership procedures.