Brazilian bananas are characterized by high yield, good quality, and strong disease resistance. According to the experiment, planting Brazil banana tube seedlings yields more than double the yield of traditional bananas. Its high yield cultivation techniques are as follows:
The site selection site will be selected for fertile, fertile and convenient land cultivation. In the month before planting, first deep-dip 30 cm to 40 cm, let the soil fully weathered, and then well-grounded. When planting, planting ditch should be dug. The ditch should be 60cm to 100cm in width, 30cm to 60cm in depth, and there must be a deep ditch in the ditch. The summer rainy season is convenient for drainage. In the fall and winter season, ditch ditch is maintained. Keeping the soil moist by capillary water is beneficial to banana growth.
Basal fertilizer is mainly based on high-quality farmyard fertilizers, such as pigs, cattle, chickens, ducks, and other organic fertilizers. Each plant uses 5 kg to 15 kg as base fertilizer.
Planting specifications generally plant 120 to 140 acres per plant. If the planting is too dense, it will not be conducive to ventilation and light transmission and will not achieve high yields.
Planting time can be planted in spring and autumn, and spring planting is generally preferred. If the spring planting of bananas strengthens the management of fertilizer and water, it can be harvested before December of that year.
Fertilizing method According to the growth characteristics and growth period of Brazilian bananas, sufficient fertilizer is applied. The seedling stage is mainly farmhouse manure or compound fertilizer (15:15:15), applied 3 times to 4 times per month, and applied frequently and lightly. For better, when the plant height is 60 cm to 80 cm, heavy fertilizer is started, and peanut bran is used to add potassium fertilizer. Each plant applies 0.25 kg to 0.5 kg of peanut bran, and potassium is 0.25 kg to 0.5 kg. Apply twice a month. In the flower bud differentiation period after 20 leaves of bananas, apply 0.25 to 0.5 kg of urea per plant and 0.25 to 0.5 kg of potassium fertilizer. Take 30 leaves to start drawing and apply to each bud. Kg ~ 0.75 kg (15:15:15): During the period of budding, 0.5 kg to 0.75 kg of potassium fertilizer and 0.25 kg to 0.5 kg of urea were applied to each plant.
Scientific drainage of bananas is a cash crop that is both water-fighting and afraid of waterlogging. In order to seize the high yield of bananas, it must be done to eliminate waterlogging on rainy days, and it is necessary to timely water the drought for 5 days to 7 days without drought, so that the banana fields can always keep the soil moist and be conducive to the growth of bananas.
Timely removal of buds The suction of bananas from Brazil is more than that of ordinary bananas. When the sucker emerges from the ground, it must be promptly removed to allow the fertilizer to concentrate on the growth of the mother plant.
Wind protection When the banana grows to a height of 150 cm or more, it is necessary to keep it in good order and fasten the seat belt to prevent the typhoon from blowing off the banana trees.
The main insect pests in the control of pests and diseases of bananas include armor, aphids, spider mites, aphids, etc. The diseases include leaf spot disease and black spot disease. For the prevention and treatment of leaf spot and black spot disease, prevention must be the focus and prevention and control should be combined. In general, when the banana seedlings grow 20 leaves, they are sprayed once to prevent the disease and protect the leaves. The use of agents can be used to remove the enemy, should be available, must shake, Shi Baoke and other efficient fungicides. If these agents are used interchangeably, the effect will be better, so as to avoid adaptability and resistance to pathogens.
After bagging the cold-proof bananas, when the banana fruits are turned upwards, spray the banana enlarger once or twice, and put on a green film bag to protect the banana fruit in time. It has been proved that banana bagging can not only prevent cold but also prevent pests and diseases. It can make banana fruit without spots, with good color and high price.

Indicating Tape,sterilization and sterilization Indicator tape is a product of sterilization process indication.The color of the indicator ink on the adhesive tape changes after sterilization and sterilization,to determine whether the article has been disinfected,and the intuitive and convenient sterilization status of the reaction article.
Ethylene oxide sterilization is used to indicate whether the sterilization package has been subjected to ethylene oxide sterilization.Cut the appropriate length of tape on the package to be sterilized(or place the indicator card together with the article to be sterilized),and then place it in an ethylene oxide sterilization chamber with an ethylene oxide concentration of 600±50 ml/l.50 °C,humidity 65% ~ 80%,3 hours sterilized,the rubber will change from red to green,indicating that the article was sterilized.

Indicating Tape

Indicating Tape,Medical Indication Tape,Temperature Indicating Tape,Indicating Adhesive Tape

Henan Sanqiang Medical Equipment Liability Co.,Ltd , http://www.sterilizers-china.com