Clutch clutch is not clear 1 reason. The clearance between the separating lever and the separating bearing is too large or unequal, and the active plate and the passive plate cannot be completely separated or the bearings are damaged. 2 repair methods. The free clearance between the lever and the release bearing can be adjusted and the release bearing can be replaced. Gearing difficulties 1 reasons. The clutch is not completely separated, the brake gap of the small brake is too large or the working gear is not engaged; the dirt inside the flexible shaft increases the resistance of the gear. 2 repair methods. Should remove the dirt inside the shaft, and add a small amount of talc; adjust the clutch or small brake gap.
Our products are exported to all over the world, facing Europe, America and Asia and other countries, there are a large number of hot products in stock at present, there are plant extracts, amino acids, Vitamins and other products, the price is preferential, quality assurance, is our very popular products in the market, waiting for your inquiry and purchase.
Plant Extracts,Amino Acids,Vitamin Products,Medical Excipients PYSON Co. ,Ltd. , https://www.pysonbio.com
Harvester walking system malfunctions
Travel clutch slip 1 reason. The separation lever (three-jaw) is not on a flat surface; the wear of the friction plate is too large, the spring pressure is reduced, or the friction plate rivet is loosened; the surface of the driving plate and the passive plate is uneven. 2 repair methods. The active disk, passive disk flat, replace the pressure spring. If there is no spring, a small four-wheel tractor clutch spring can also be used instead; adjust the release lever nut; repair or replace the friction plate.