Cool skin machine maintenance method

1. Check the whole machine before starting the machine and add appropriate amount of cooking oil to the bearing position.

2, the surface of the dry humidity should be appropriate, each bowl of water needs to add 30-35 kg of water, and add salt 1-1.5 kg, mix and mix evenly.

3. The feed is uniform. According to the condition of pressing out the noodles, the speed is adjusted appropriately. When the pressed noodles are born, the feed rate should be lowered, and when the temperature is high, the feed rate is increased.

4, after the machine out of the noodles, the wind can be dried for a long time.

5. When using noodles, determine the cold water soaking time according to the length of the machine, about 10-20 minutes. After soaking, gently rub it with your hands, then remove the noodles and remove them. Add hot soup or hot water and seasoning. .

6. After the shutdown, go to the lower cap in time, idling and turning, and throw the remaining surface in the machine in time, and put the leaking basin into cold water to soak. Note that the finished noodles cannot be boiled in water, and they cannot be boiled.