Self-adhesive bandage testing instrument

Labthink Languang As an excellent provider of testing instruments and inspection services, we have been providing customers for medical, medical, food, daily, packaging, printing, adhesives, automotive, petrochemical, environmental, biological, new energy, construction, aviation and electronics industries for many years. Excellent, Zui comprehensive quality control solution.

The self-adhesive bandage test items mainly include: barrier performance test (gas permeability test and water vapor transmission test), friction coefficient (slipperiness of material surface), tensile strength and elongation, peel strength, heat seal strength (heat sealing) Strength), sealing and leak detection, tear resistance, print quality inspection, etc. Labthink (Jinan Languang Electromechanical Technology Co., Ltd.) combines the needs of self-adhesive bandages to produce enterprises. The information on self-adhesive bandages is as follows, in order to help the quality inspection of self-adhesive bandages.

First, self-adhesive bandage barrier performance test

Self-adhesive bandage barrier refers to the barrier effect of packaging materials on permeates such as gases (such as oxygen) and liquids (water vapor). Barrier performance is an important factor affecting the quality of a product during shelf life. The instrument information list is as follows:

1, PERME-DM2/330 double-detection gas permeability tester: differential pressure and equal pressure double test for plastic film, composite film and other film, sheet material and finished container gas permeability test. Three-chamber independent, automatic, temperature control, arbitrary temperature data fitting, support LAN data centralized management, patented products.

2, PERME-OX2/230 Oxygen Transmission Rate Test System: Coulomb principle, isobaric test of the oxygen permeability of film, sheet material and packaging containers such as bottles, bags, cans and boxes. Host and satellite mode, one host can be connected to nine satellites, and 30 samples can be tested simultaneously.

3, VAC-V series differential pressure gas permeation instrument is used for the measurement of the gas permeation amount of O2, N2 and CO2 in plastic film, sheet, composite film and other materials. The principle of differential pressure method. This series has VAC-V1, VAC-V2, VAC-V3 and other models.

4, PERME-W3/330 Water Vapor Transmission Rate Test System: For the determination of water vapor transmission rate of films, sheet materials and packaging containers such as bottles, bags, cans and boxes. Host and satellite mode, one host can be connected to nine satellites, and 30 samples can be tested simultaneously.

5, TSY-T series moisture permeability tester: test of water vapor transmission rate of various packaging materials and polymer products such as film and composite film; temperature control, automatic control; computer monitoring and weight method. This series has TSY-T1H, TSY-T1L, TSY-T3 and other models.

Second, self-adhesive bandage strength test

The self-adhesive bandage strength test includes the tensile strength of the packaging material, the peel strength of the composite film, the heat seal strength, the tear strength, and the puncture resistance. Tensile strength means that the material is subjected to a large stress value of zui before being broken. The detection can effectively solve the damage and breakage of the package caused by the external force due to insufficient mechanical strength of the selected packaging material. The peel strength is also referred to as composite strength, and is a joint strength between layers and layers in the composite film. If the adhesive strength is too low, problems such as leakage due to interlayer separation during packaging use are extremely likely to occur. The heat seal strength is the strength of the seal. During the storage and transportation of the product, once the heat seal strength is too low, the heat seal is cracked and the contents are leaked. Puncture resistance is an indicator of the ability of a package to resist the penetration of hard objects.

The corresponding test instrument information is as follows:

1, XLW series intelligent electronic tensile testing machine: film, composite film, adhesive, adhesive tape and other peeling, tensile test, heat sealing strength test, professional test of tear performance. The series has XLW, XLW (B), XLW (M), XLW (PC), XLW (G) and other models.

2, BLD-200S electronic peeling test machine: peeling, tensile test, heat sealing strength test of film, composite film, adhesive, adhesive tape, etc.; standard specification 200N (100N, 50N, 30N), micro-play, computer communication interface.

3, HST-H3 heat seal tester: sample preparation for film heat seal strength test, pressure, temperature, time adjustable. It adopts single-chip control and intelligent operation; the temperature adopts PID high-precision components to ensure accurate and reliable temperature.

4, RTD-R2 heat sealing gradiometer: It can prepare samples of plastic film, flexible packaging composite film and other materials at 5 sets of independent temperature at one time, and heat-sealed five sets of samples at a time, high efficiency.

Third, self-adhesive bandage sealing performance test

The sealing performance test of the self-adhesive bandage ensures that the seal of the entire product package is intact, preventing leakage due to poor sealing performance of the product and causing the package to deteriorate.

1. MFY-01 Sealing Tester: Vacuum is used in the vacuum chamber for reliability testing of packaging seals. Microcomputer control, panel operation, digital setting test parameters, fully automatic test

2, LSSD-0 leakage and seal strength tester: packaging bag, plastic bottle, packaging container heat seal strength and seal integrity test, test process intelligent, liquid crystal display, statistical communication; positive pressure principle

Fourth, self-adhesive bandage top air body analysis

HGA-01 top air analyzer is used for the determination of oxygen, carbon dioxide gas content and mixing ratio in sealed packaging bags, bottles, cans, etc. It is suitable for fast and accurate in the packaging line in warehouses, warehouses, laboratories, etc. The content and proportion of the gas components are evaluated to guide production and ensure that the shelf life of the product is achieved.

Five, self-adhesive bandage impact resistance test

Test the impact resistance of self-adhesive bandages to ensure that the selected packaging material is effective in protecting the product. The impact resistance test has two test methods: dart impact and pendulum impact.

BMC-B1 Dart Impact Tester: A free dart test method for determining the impact mass and energy of a damaged or damaged plastic film or sheet at a given height.

FIT-01 film impact tester for the determination of impact resistance of plastic film, sheet, composite film, aluminum foil, etc. The hemispherical punch of the film impact tester impacts at a certain speed and passes through the film sample, measuring the punch The energy consumed is used to evaluate the anti-pendulum impact capability of the film.

Sixth, self-adhesive bandage tear performance test:

Self-adhesive bandages may be torn by external force during storage and transportation. Sufficient tear propagation resistance can reduce tear transmission and avoid packaging leakage.

SLY-S1 Tear Tester: Elemendorf method for tear resistance testing of films, sheets, paper, cardboard, etc.

Seven, self-adhesive bandage friction coefficient (surface slippery)

The inner and outer surfaces of the self-adhesive bandage should have suitable slip properties to ensure good openness and smooth transport and packaging on high speed production lines.

1. MXD series friction coefficient meter: It is suitable for measuring the static friction coefficient and dynamic friction coefficient of plastic film and sheet, paper and other materials when sliding. By measuring the slipperiness of the material, it is possible to control the production quality process indexes such as adjusting the opening property of the packaging bag and the packaging speed of the packaging machine to meet the product use requirements. The series has three products: MXD-01, MXD-01A and MXD-02.

2, FTP-F1 friction coefficient / peel tester: computer control, can test the material friction coefficient from room temperature to 99.9 degrees, and can also test the composite film, adhesive products at very warm peel strength test.

Eight, self-adhesive bandage thickness measurement

Thickness is the basic indicator for detecting films. Uneven thickness will not only affect the tensile strength and barrier properties of the film, but also affect the subsequent processing of the film.

1, CHY-C2 thickness gauge: used to measure film, sheet, paper thickness. Mechanical contact measurement method, not subject to measurement materials; imported high quality sensor, measurement resolution up to 0.1 micron; measuring head to film (paper) contact Area and contact pressure strictly comply with relevant standards; compatible with ISO, ASTM and other measurement standards.

2, CHY-CA thickness gauge: 0.1um high-precision, multi-point automatic continuous measurement, liquid crystal display, micro-play, statistics, communication.

Nine, self-adhesive bandage printing quality testing equipment

1. Printing ink layer bonding fastness: YGJ-02 adhesive tape rolling machine and BLJ-02 disc peeling test machine, used in combination with two machines, suitable for printing printing on plastic film and cellophane decorative prints (including composite film prints) Test test for layer bonding fastness. It is also used for the test test of the adhesion state of the surface layer formed by vacuum coating, surface coating, composite and other related processes.

2. MCJ-01A friction tester: It is suitable for the test test of the abrasion resistance of printed ink layer, the abrasion resistance of PS plate photosensitive layer and the abrasion resistance of surface coating of related products. Effectively analyze the problems of poor rub resistance of the printed matter, falling off of the ink layer, low printing durability of the PS plate, and poor coating hardness of other products.

3, RT-01 friction tester: printing ink layer wear resistance test. Arc motion mode; dual-station symmetrical design, high test efficiency, in line with international standards such as ASTM, TAPPI

For more information, please call Zhang Jianbo (), headquarter of Jinan Languang Electromechanical Technology Co., Ltd.

We have Specimen Container includes Stool Container,Sputum Container,Disposable Urine Container and so on.

Classification of sample containers,Specimen Container:

1. According to the use type: there are urine Specimen Container and feces Specimen Container, etc

2. By capacity: 20ml, 25ml, 4ml, 30ml, 40ml, 100ml, 200ml, etc

Vacuum sample Specimen containers are generally preferred, and sterilized sample Specimen containers are preferred.

Specimen Container

Specimen Container,Laboratory Sputum Container,Stool Container,Sputum Container,Disposable Urine Container

Hebei Orient Imp. & Exp. Co. Ltd. , https://www.orientmedcare.com