Mouse glucose-6-phosphate dehydrogenase (G6PD) ELISA kit instructions

The kit is used for quantitative determination of mouse glucose-6-phosphate dehydrogenase (G6PD) in serum, plasma, tissue, cell supernatant and related liquid samples in vitro.

Validity: 6 months

Storage conditions: 2-8 ° C

Experimental principle of mouse glucose-6-phosphate dehydrogenase (G6PD) ELISA kit

The kit uses a double antibody one-step sandwich enzyme-linked immunosorbent assay (ELISA). The coated microcapsules of the mouse glucose-6-phosphate dehydrogenase (G6PD) capture antibody were pre-coated, and the specimen, the standard, and the HRP-labeled detection antibody were sequentially added, and the cells were washed and thoroughly washed. Using the substrate TMB to develop color, TMB is converted to blue under the catalysis of peroxidase and converted to the final yellow color by the action of an acid. The color depth is positively correlated with the mouse glucose-6-phosphate dehydrogenase (G6PD) in the sample. The absorbance (OD value) was measured at 450 nm using a microplate reader to calculate the sample concentration.

Mouse glucose-6-phosphate dehydrogenase (G6PD) ELISA kit sample processing and requirements

1. Serum : Whole blood samples should be placed at room temperature for 2 hours or 4 °C overnight, centrifuged at 1000g for 20 minutes, the supernatant can be detected, or the specimens can be stored at -20 ° C or -80 ° C, but should be avoided repeatedly melt.
2. Plasma : EDTA or heparin can be used as anticoagulant. The specimen should be centrifuged at 2-8 °C for 1000 minutes within 20 minutes after collection, or the specimen should be stored at -20 °C or -80 °C, but repeated freezing and thawing should be avoided. .
3. Cell culture supernatant or other biological specimens : centrifuge at 1000g for 20 minutes, take the supernatant to detect, or store the specimen at -20 °C or -80 °C, but avoid repeated freezing and thawing.
Note: Specimen hemolysis will affect the final test results, so hemolysis specimens should not be tested.

Reagents and equipment that are needed but not provided

• Microplate reader (450nm)
• High-precision sampler and tip: 0.5-10uL, 2-20uL, 20-200uL, 200-1000uL
• 37 ° C incubator
• Distilled or deionized water

Precautions

• Incubation is carried out strictly in accordance with the specified time and temperature to ensure accurate results. All reagents must reach room temperature 20-25 °C before use. Store the reagents refrigerated immediately after use.
• Incorrect cleaning can result in inaccurate results. Make sure to drain the liquid in the well as much as possible before adding the substrate. Do not let the micropores dry during the incubation process.
• Eliminate residual liquid and fingerprints at the bottom of the board, otherwise it will affect the OD value.
• The substrate coloring solution should be colorless or very light, and the substrate liquid that has turned blue cannot be used.
• Avoid cross-contamination of reagents and specimens to avoid erroneous results.
• Avoid direct exposure to strong light during storage and incubation.
• After balancing to room temperature, the sealed bag is opened to allow water-repellent drops to condense on the cold slats.
• Any reagents should not be exposed to strong gases emitted by bleaching solvents or bleaching solvents. Any bleaching component will destroy the biological activity of the reagents in the kit.
• Cannot use expired products.
• If the disease is likely to spread, all samples should be managed and the sample and test device processed in accordance with the prescribed procedures.

Reagent preparation

The kit should be taken out of the refrigerated environment and should be balanced at room temperature before use.

Dilution of 20× Wash Buffer: Distilled water was diluted 1:20, ie 1 part of 20× Wash Buffer plus 19 parts of distilled water.

Steps

1. The required slats were taken out from the aluminum foil pouch after equilibrating for 20 min at room temperature, and the remaining slats were sealed back to 4 ° C with a ziplock bag.
2. Set standard and sample wells, standard wells with different concentrations of standard 50μL;
3. Add 50 μL of the sample to be tested to the sample well; blank holes are not added.
4. In addition to the blank wells, 100 μL of horseradish peroxidase (HRP)-labeled detection antibody was added to each well of the standard well and the sample well, and the reaction well was sealed with a sealing plate, and incubated at 37 ° C in a water bath or incubator for 60 min.
5. Discard the liquid, pat dry on the absorbent paper, fill each well with the washing solution (350 μL), let stand for 1 min, remove the washing solution, pat dry on the absorbent paper, and repeat the washing 5 times (can also be washed with a washing machine) .
6. 50 μL of each of the substrates A and B was added to each well, and incubated at 37 ° C for 15 min in the dark.
7. 50 μL of the stop solution was added to each well, and the OD value of each well was measured at a wavelength of 450 nm within 15 min.

Experimental result calculation

The OD value of the tested standard is the abscissa, the concentration value of the standard is the ordinate, the standard curve is drawn on the coordinate paper or with the relevant software, and the linear regression equation is obtained, and the OD value of the sample is substituted into the equation to calculate the sample. concentration.

Kit performance

• Detection range: 3.75 ng/mL – 120 ng/mL.
• Sensitivity: The minimum detection concentration is less than 0.1 ng/mL.
• Specificity: Does not cross-react with other soluble structural analogs.
• Repeatability: The intra-plate variation coefficient is less than 10%, and the inter-plate variation coefficient is less than 15%.

Mouse glucose-6-phosphate dehydrogenase (G6PD) ELISA kit related product recommendation:

Human FMS-like tyrosine kinase 3 ligand (Flt-3L) ELISA kit

Human mesothelin (MSLN) ELISA kit

product name

Human anti-cyclic proline peptide antibody (CCP) ELISA kit

27994-11-2 Cimicifuga glycosides

Human composite prostate specific antigen (CPSA) ELISA kit

Mouse RAS Oncogene Family Member RAB5a (RAB5a) ELISA Kit

299-39-8 cytisine sulfate

Cholic acid ELISA kit

Mouse Chitinase 3 Like Protein 3 (CHI3L3) ELISA Kit

Human nicotinamide adenine dinucleotide phosphate oxidase 1 (NOX1) ELISA kit

Plant pectinase ELISA kit

Duck cholera antibody (PM Ab) ELISA kit

Human soluble CD100 (sCD100) ELISA kit

Bovine citrate (CS) ELISA kit

Canine Heat Shock Protein 70 (HSP70) ELISA Kit

Human Mucin 17 (MUC17) ELISA Kit

Human L-selectin ELISA kit

Hamster Matrix Metalloproteinase 9/Gelatinase B (MMP-9/Gelatinase B) ELISA Kit

Human serine protease HTRA1 (HTRA1) ELISA kit

Bovine Vitamin K Dependent Protein S (PROS) ELISA Kit

28978-02-1 saponin

Canine Golgi Membrane Protein 1 (GOLM1) ELISA Kit

Rat prostacyclin (PGI2) ELISA kit

Mouse Hepatitis B Surface Antibody (HBsAb) ELISA Kit

Canine angiotensin I (AngI) ELISA kit

Porcine interferon beta (IFNβ) ELISA kit

Human apolipoprotein B (APOB) ELISA kit

Human chondroitin sulfate (CS) ELISA kit

Mouse nitric oxide synthase (NOS) ELISA kit

Mouse CX3C chemokine; fractalkine (FKN; CX3CL1) ELISA kit

Porcine thromboxane A2 (TX-A2) ELISA kit

Rabbit type I collagen (Collagen I) ELISA kit

Guinea pig IL-1α (IL1α) ELISA kit

Bovine estriol (E3) ELISA kit

Mouse Glucagon ELISA Kit

Human neopterin (NP) ELISA kit

Bovine Hydroxymethylglutaric Acid Coenzyme A (HMGCoA) ELISA Kit

Human rabies virus IgG antibody ELISA kit (qualitative)

Mouse glucose-6-phosphate dehydrogenase (G6PD) ELISA kit , please contact our sales customer service hotline--021-60520062, 18721729907 QQ, welcome your inquiry, request for instructions, inquiry message form, telephone, Online customer service QQ, send emails. Keshun Bio is a professional high-quality Elisa kit, production, supplier, we will be sincere, please rest assured to buy! Note: All products of the company are for scientific research only and should not be used for clinical purposes.

Food And Beverage Additives

Food additives refer to chemically synthesized or natural substances added to food in order to improve the quality, color, aroma and taste of food, as well as for the needs of antiseptic and processing technology. Due to the rapid development of the food industry, food additives have become an important part of the modern food industry, and have become an important driving force for technological progress and technological innovation in the food industry. In the use of food additives, in addition to ensuring that they play their due functions and roles, the most important thing is to ensure the safety and hygiene of food.