Medical Blister Packaging Machine Blister Sealing Machine,Paper Threading Machine,Pill Blister Pack Machine,Blister Packaging Machine taicang hexiang packaging material co.,ltd , https://www.medpackhexiang.com
(2) Compulsive moulting generally uses artificial light to stop, material is stopped for 2 to 3 days, only a small amount of green fodder is provided, and the method of ensuring sufficient drinking water is provided; on the 4th day, the green composed of green material and bran gluten residue is added. For roughage, test the main wing feathers and ailement feathers on the 10th day or so. If the test is effortless, the roots will dry out and the root can be removed one by one. Otherwise, it should be removed every 3 to 5 days before pulling out the main tail feather. In the condition of large-scale rearing, forced moulting of geese is usually performed in combination with live-pull down, that is, after the whole group and grouping are completed, the forced moulting method is applied for about 1 week to start the live pull-down operation of the geese. . After the plucking, when the swans should be housed in the sports ground to feed and feed water, the geese cannot be allowed to enter the water to prevent bacterial infection and cause inflammation of the pores. Because of poor adaptability during a period of time after pullout, stress from rain and sun exposure should be prevented. Live pull down can be performed again after 7 weeks. This will increase economic efficiency and enable the geese to be neat and manageable.
The breeding geese entering the perinatal period should be grazing-based, and the rations in the laying period should be changed to rations during the breeding period. The purpose is to consume the body fat of the goslings, improve the ability of the geese to resist roughage, and reduce the cost of feeding. For large-scale geese, feeding and management methods are used during the maintenance period.
How to manage goose breeding geese?
(1) The whole group and the grouped group are the rearranged groups; the grouping is the rearing of the male and female geese. When the egg production rate of geese drops below 5%, it indicates that breeding geese will enter a long period of maturation. The geese are generally used for 3 to 4 years before they are eliminated. However, when they go to rest each year, the geese with low disabilities, diseases, and low egg production must be eliminated, and the poor goslings must be eliminated in proportion. At the same time, in order to enable male and female geese to successfully achieve the best body condition after the maturation period, ensure a high fertility rate, and ensure the management of live-pull down and post-consistency, the male and female geese must be reared Group feeding.