All the heads are one time moulding . And all the inner Rcorners are larger than 30mm.To ensure there is no right-angle inside the tank. the insulation layer PUF. Temperature raise less than 2°C within 24 hrs:
1.About the material:
AISI/SUS 304-2B(S.S304)food grade stainless steel plate sheet ,inside shell 2.5-3mm / outer shell 2mm, one time molding heads.
2 .Special welding process :
TIG welding process, to obtain the good outlook and reduce the crack and pit. All surface can be polished shinning like mirror.
3.One time molding heads and injecting PUF or use fiber glass.
And each compartment use double heads back-to-back which make sure every compartment heads smooth and no right-angle left,easy to wash.
Using polyurethane foam(PUF) /glass fiber to get better insulation ability, which has the perfect warmth keeping ability and ensure temperature raise not too fast
4.Milk out-let pipe and air vent
Each milk compartment has one set separate out-let pipe and air vent.out-let pipes which usesΦ50×2.0 polished stainless steel (sanitary parts), all pipes inside the insulation layer to make sure no frozen milk occurs in winter and no milk rotten in summer.
5.The CIP cleaning system
Equipment with automatic self-rotation ball(spray cleaning ball) inside the tank, and CIP joint in rear carbin.
6. Rear cabinet for tools/pipe /pump/and milk sampling.
The lockable rear cabinet design make the tanker have a tidy general look.and convenient for use/you add other device( according yourdesign).
7.The design of the manhole cover
All the covers are Anti-Spillage design, to avoid the over flow and leakage of the milk from top cover.
8.The Top anti-skid platform.
Anti-skid platform on the top of tank body made of Aluminium alloy plate with skid-resistant surface. For safyty.the anti-skidplatform with Φ25mm handrails(S.S) of 250mm height.
9.The breath airway(air vent):
Air vent diameter no less than Φ120mm.
10 .The tank body design:
The scientific long axis and short axis design for tank body meets the hydrokinetics requirements and ensures the safety of vehicles.and we can design the tank according your trailer(truck) size.
11 .The chassis of the vehicle
The vehicle chassis standard FAW chassis.or we provide semi-trailer chassis according your demand.
Road Milk Tanker Milk Tanker,Road Milk Tanker,Milk Tanker Trailer,Transport Milk Tank Truck Henan Leo Husbandry Equipment Science and Technology Co.ltd , https://www.chinaleodairy.com In the absence of trees, how to carry out aquaculture is a topic that many friends are concerned about. Wuyang Yuanshi Forest Ecological Park Jinyu breeding base has explored a set of highly efficient breeding models. Expanding the road for the breeding of goldfish.
Choose a plot with a high topography and no accumulated water, thick soil, fertile, non-chemical contaminants. The area may be large or small, deep and flat, deep application of organic fertilizers and compound fertilizers, and the treatment of sand traps after thawing in the spring Peaches, apricots, plums, apples, etc., or willow and poplar branches are planted in 50 cm intervals and 20 cm in spacing. The mulching of the plastic film is required to promote the development of the root system and the tree vigor. In the months from May to June, the hatched ants and egg sticks were planted. In the second year and the third year, it is necessary to carry out division and interleaving. Before harvesting for the third year, a strip of film was wrapped around the tree to allow the vines to climb on a tree without wrapping around the membrane for harvesting. Per square meter can be harvested into about 150 or about 0.6 kilograms, the effect of mu is more than 20,000 yuan.
Road Milk Tanker (Milk Tank trailer)5-60tons:
Jinhao High-efficiency Breeding Technology