The correct operation method of the vacuum packaging machine explains how to complete the operation of the vacuum packaging machine. Here is how to operate the vacuum packaging machine: covid19 Anesthesia Medical Co., Ltd. , https://www.honestymed.com
1. First of all, you should check the smoothness of the machine placement; whether the lid can be opened smoothly; the position of the oil in the vacuum pump is properly added; see if the circuit, switch and ground wire are connected? Turn on the power: dial the power supply as needed The switch, that is, the power indicator light is on; the power selection switch points to the vacuum for the vacuum seal, and the vacuum is directed to the vacuum inflation seal. Adjust the vacuum of the vacuum packaging machine and the pumping time to adjust the heating temperature and time.
2. After the vacuum packaging machine is ready for work, place the plastic bag containing the items in the vacuum chamber, and the bag mouth is neatly placed on the heat seal. At least one nozzle should be inserted into the mouth of the bag as an air-filled package. Press the cover and the air pumping (vacuum) indicator on the panel lights up. The vacuum pump starts pumping, the cover is automatically sucked, and the vacuum knob can adjust the vacuum level according to the packaging requirements. When adjusting, the scale is from low to high. Be small.
3. When the pumping reaches the set time (ie the required degree of vacuum), that is, the pumping is over, the pumping indicator light is extinguished, and the airing indicator light is on to indicate the start of the inflating. The inflating knob can adjust the length of the inflating time (ie, inflating) How much?) The method is the same as above. If you do not need to inflate. Turn the power switch to the vacuum position, the program will automatically enter the vacuum packaging, and the airing indicator will go out.
4. When the air pumping or inflation is completed, the indicator light will be extinguished, and the heat seal indicator light will be on, that is, the sealing program will be entered. The heat sealing time and temperature adjustment knob are arranged on the panel to adapt to different thickness materials, and when adjusting the time and temperature, the rotation is performed. The amplitude should be small to prevent the heat seal temperature from suddenly increasing and burn out the heat seal fittings.
5. When the set heat sealing time is reached, the heat seal indicator light is extinguished, as the heat seal ends, that is, the vacuum chamber enters the atmosphere through the solenoid valve until the cover is automatically lifted, and the vacuum packaging process is completed, ready for the next packaging. cycle.
In normal times, we also use the vacuum packaging machine to maintain it regularly. First of all, it is necessary to carry out regular inspections, especially the core component vacuum pump, to find problems and solve them in time. The second is to keep the studio clean and tidy, and clean the machine regularly, especially the oil removal of the vacuum pump and the cleaning of the filter unit. After the zui operation is strictly in accordance with the regulations, do not violate, when the machine is not applicable, be sure to cut off the power. This can be used safely, and can extend the life of the machine, killing two birds with one stone.
How to operate the vacuum packaging machine correctly