Dried Garlic,Dried Garlic Flakes,Dry Garlic Powder,Dehydrated Garlic Powder Jining Yuanheng International Trading Co.,Ltd , https://www.china-garlic-exporter.com
Digital display water bath oscillator (shaker), also known as water bath constant temperature shaker , is divided into three kinds of oscillations: reciprocating water bath oscillator (shaker), swirling water bath oscillator (shaker) and dual-function water bath oscillator (shaker). mode, according to distinguish between normal temperature water bath shaker (shaker) and low temperature water bath shaker (shaker) two series. water bath shaker (shaker) a stainless steel jig Wan, digital temperature controller, variable speed and good heat circulation. is a versatile chemical and biological equipment, preparation is essential laboratory equipment plant, biology, microbiology, genetic, viral, environmental, medical and other scientific research, education and manufacturing sectors for precision training.
Can be equipped with a speedometer
Can be equipped with a speedometer
100ml × 15 200ml × 9
100ml × 15 200ml × 9
100ml × 15 200ml × 9
2 , The working plane of the machine should not be excessively smooth (eg tiles, etc.).
3 , The electrical rating of the socket provided by the user shall not be less than the electrical rating of the machine and have good grounding measures.
4 , The whole machine is strictly prohibited from being used in direct sunlight.
5 , The speed should start slowly from low speed to high speed.
6 , The machine may have a certain shift when it oscillates at high speed, so it should be taken care of when using it.
2 , Turn on the power and set the timing according to the surface scale of the machine. If you need to work for a long time, adjust the timer to the “ normally open †position.
3 , Turn on the power switch and set the constant temperature:
( 1 ) Put the control small switch in the “ set †section. At this time, the temperature displayed on the display is the set temperature. Adjust the knob and set it to the temperature you need to work. (The operating temperature you set should be higher than the ambient temperature. At this point, the machine starts to heat up, the yellow indicator light is on, otherwise the machine does not work)
( 2 ) Place the control part of the small switch in " Measurement
Water bath thermostat oscillator, branch parameters, use method, attention top and maintenance
A brief introduction to the water bath thermostat (shaker) :
Water bath thermostatic oscillator (shaker) range of use: mainly used in various universities, oil chemical industry, health and epidemic prevention, environmental monitoring and other scientific research departments for biological, biochemical, cell, strain and other liquid and solid compounds shaking culture . The water bath constant temperature oscillator (shaker) has the characteristics of reasonable structure, simple operation and high stability, and is an ideal equipment for laboratory staff.
Details of the water bath thermostat oscillator (shaker):
Indicator \\\\\\\\
SHA-C reciprocating
THZ-82 roundabout
SHA-B dual function
range of rotation
Start- 300r/min
Start- 300r/min
Start- 300r/min
Temperature control range
Room temperature -100 °C
Room temperature -100 °C
Room temperature -100 °C
Temperature control accuracy
±1 °C
±1 °C
±1 °C
Vibration CC
25mm
20mm
25,20mm
heating power
1200W
1200W
1200W
Bottling amount
Test tube: ¢ 16×200
Test tube: ¢ 16×200
Test tube: ¢ 16×200
Timing range
0-120min (or normally open)
0-120min (or normally open)
0-120min (or normally open)
Power
AC 220V50Hz
AC 220V50Hz
AC 220V50Hz
Dimensions
700×600×400
700×600×400
700×600×400
Instructions for using a water bath oscillator (shaker)
1. Please read this manual carefully before use.
Water bath oscillator (shaker) instructions
1 , Load the test bottle and keep it balanced. If it is a dual-function model, set the oscillation mode. (Detailed settings are shown in the last figure)