Use of agricultural machinery during spring farming

During the spring season, various agricultural machinery are put into production operations. In order to reduce the use of failures, improve operational efficiency, and ensure safe production, the following precautions for agricultural machinery use in spring are introduced as follows:

1. All kinds of agricultural machinery should be cleaned, lubricated, adjusted, etc. before use in accordance with the requirements of the instruction manual to ensure that the equipment is put into operation with a good technical condition.

2. For the maintenance of the power mechanical lubrication system, in addition to using the lubricating oil according to the specified standards, it is also necessary to strictly observe the maintenance cycle and specifications of the lubrication system, regularly clean the lubrication system, and regularly replace the filter components to reduce mechanical wear.

3. The temperature in the early spring is fickle and the correct use of the cooling system for power machinery cannot be ignored. Continue to do a good job of anti-freezing. When the temperature is lower than 0°C at night, the cooling water should be drained to avoid freezing and cracking. When the machine is started at a low temperature, warm-up should be started to pay attention to the normal operating temperature of the engine. The normal working temperature should be maintained at 80 °C ~ 95 °C to reduce unnecessary engine wear.

4. The tractor must strictly abide by the operating rules to ensure safe production when performing rotation cultivation, sowing, transportation and other operations.

1 Fuel net. At present, most of the agricultural machinery engines are diesel engines, so the diesel purification work is very important.

2 lubricant net. Always pay attention to the use of clean lubricants that meet the standards of this machine.

3 air net. When the engine is running, the cylinder inhales 2 to 4 cubic meters of air per minute. In order to ensure that the air entering the cylinder is clean, the air filter must be inspected and cleaned regularly.

4 cooling water net. The engine cooling water is preferably made of soft water such as snow water, rainwater, treated tap water, or clean wells. When cleaning the cooling system, add 1% caustic soda and 0.5% kerosene in proportion to the water volume.

Supplier Extract Powder

We're Professional Supplier Extract Powder manufacturers and suppliers in China specialized in providing high-quality products at low price. We warmly welcome you to buy or wholesale bulk Supplier Extract Powder for sale here from our factory. For a free sample, contact us now.


Supplier Extract Powder,Supplier Extract ,Supplier Powder Manufacturer in China

Shaanxi Kang New Pharmaceutical co., Ltd. , https://www.bio-pharmacies.com