Wenzhou Celecare Medical Instruments Co.,Ltd , https://www.celecaremed.com
The future development of high temperature sterilization pot is very impressive
The high temperature sterilization pot is a kind of sterilization boiler. It has a shutter type pressure vessel safety interlocking device and an independent electrical instrument control system. It is automatically controlled by constant temperature, heat preservation and timing. It is made of stainless steel and has the characteristics of beautiful appearance, health, safety and durability.
High temperature sterilization pot basic structure
The high-temperature sterilization pot is cylindrical and supported by four supports. The pinning of the lid and the body of the pot is completed by the self-spinning wedge block. Ten pairs of self-spinning wedge blocks are evenly distributed and fixed on the lid and respectively. The rotating ring and the rotating ring are equipped with a movable type and a fixed roller device to make the rotating ring rotate freely. The device is equipped with a steam exhaust pipe, an inlet pipe, a safety valve, a pressure gauge, a thermometer, a drain pipe, an exhaust valve, a liquid level gauge, 3 electric heating rods and a trolley. The heating layer has thermal insulation material, and the design considers the heat transfer area and the heat exchange effect to meet the specified sterilization requirements, low labor intensity, high production efficiency, etc., and is very popular among users.
High temperature sterilization pot installation
1) The mounting dimensions of the anchor bolts are reasonably laid out by the user according to the site.
2) Pay attention to the change of the water level of the sterilization pot, which is about 1/3 water level during production, so as to avoid the low water level burning equipment.
3) Pay attention to whether the power supply voltage meets the requirements.
4) The user adjusts the temperature controller to change according to the production process requirements, and wet the knob to reach the steam temperature in the pot.
5) Pay attention to the pressure inside the pot.
6) Pay attention to the insulation requirements of electrical equipment, and the equipment should be well grounded to prevent electric shock.
The autoclave uses a double-tank hot water circulation, and the hot water tank can be warmed to the required temperature before sterilization in the sterilization pot, thereby shortening the sterilization time. The working medium in the sterilization process can be recycled, which saves energy, time and manpower and material consumption, and reduces production costs.
The high pressure sterilization pot has perfect pressure control and is suitable for sterilization of gas-containing packaging. Pressure equalization systems are critical to the sterilization of internal gas packaging, especially during the warming or cooling phase, requiring accurate pressure control. The control system continuously monitors the temperature and pressure within the process tank and corrects the pressure in the tank to correspond to the pressure within the package. A package containing any percentage of air or gas filled, or a package sealed under vacuum, can be sterilized without damaging or deforming the package or its contents. Unlike other systems, this system can pre-program various pressure modes for any product into a program input computer.
At present, the research and development of sterilization pot machinery is developing in the direction of high speed, multi-function and intelligent control to meet market demand. In order to meet the requirements of delivery time and reduce the need for process circulation costs, the future sterilization pot machinery is required to be capable of high-speed production.